Phaser 6200 Printer: Printing on envelopes
|
|
-
Insert the envelopes short-edge feed into the Multi-Purpose Tray.
-
Place envelopes with the flap side up and top of the envelope towards the right of the printer.
(For A7 envelopes, place the flap side up but have the top of the envelope enter the printer
first.)
-
Maximum capacity is 10 envelopes.
-
When the front panel prompts you to confirm or change the selected paper type and size:
-
Press the Down Arrow key to scroll to Change, then press the OK key.
-
Scroll to Envelopes and press the OK key to save your selection.
-
Scroll to the correct envelope size and press the OK key to save your selection.
-
In the printer driver, select either Multi-Purpose Tray as the paper source or Envelopes as the
paper type.
-
Make a test print from your application to confirm that the orientation of your envelope is correct.
 | Note: The heat from the printing process can melt certain types of envelope glue. If the envelope
flap sticks shut after printing the test print, tuck the flaps inside the envelopes when printing
the remaining envelopes. |
|
|
